2w, low cost dip, single & dual output dc/dc converters
	key features ‧low cost ‧500vdc isolation ‧mtbf > 800,000 hours ‧40mv p-p ripple and noise ‧input 5, 12, 24 and 48vdc ‧output 5, 12, 15, ±12 and ±15vdc ‧temperature performance -25°c to +71°c ‧short circuit protection ‧ul 94v-0 package material ‧internal smd construction
se-lection guide model number input voltage output voltage output current efficiency reflected ripple current vdc vdc ma % typ. ma typ. s201r 5( 4.5 – 5.5 ) 5 400 50 80 s202r 12 165 54 s203r 15 133 57 s204r ±12 ±83 53 s205r ±15 ±66 51 s206r 12( 10.8 – 13.2 ) 5 400 50 30 s207r 12 165 56 s208r 15 133 62 s209r ±12 ±83 59 s210r ±15 ±66 59 s211r 24( 21.6 – 26.4 ) 5 400 51 15 s212r 12 165 61 s213r 15 133 61 s214r ±12 ±83 61 s215r ±15 ±66 61 s216r 48( 43.2 – 52.8 ) 5 400 50 10 s217r 12 165 59 s218r 15 133 59 s219r ±12 ±83 51 s220r ±15 ±66 51
minmax"s s200r model 2w dc/dc"s are specially designed to provide 40ma output ripple, continuous short circuit in a low-profile 24-pin dip package. the series consists of 20 models with input voltages of 5v, 12v, 24v and 48vdc which offers regulated output voltages of 5v, 12v, 15v, ±12v and ±15vdc. the -25°c to +71°c operating temperature range makes it ideal for data communication equipments, mobile battery driven equipments, distributed power systems, telecommunication equipments, mixed analog/digital subsystems, automatic test instrumentation and industrial robot systems.   mechanical dimensions pin connections   pin singles duals 1 +vin +vin 2 nc -vout 3 nc common 10 -vout common 11 +vout +vout 12 -vin -vin 13 -vin -vin 14 +vout +vout 15 -vout common 22 nc common 23 nc -vout 24 +vin +vin nc: no connection   case size – 31.8x20.3x10.2mm(1.25x0.80x0.40inch) case material – non-conductive black plastic 24v input– 12.1g (0.43oz)   tolerance millimeters inches   x.x±0.25 x.xx±0.01   x.xx±0.13 x.xxx±0.005 pin ±0.05 ±0.002
absolute maximum ratings parameter min. max. units input surge voltage (1000ms) 5vdc input models -0.7 7.5 vdc 12vdc input models -0.7 15 vdc 24vdc input models -0.7 30 vdc 48vdc input models -0.7 55 vdc lead temperature(1.5mm from case for 10sec.) --- 260 °c internal power dissipation --- 3000 mw exceeding the unit absolute maximum ratings could cause damage. these are not continuous operating ratings.   general characteristics parameter conditions min. typ. max. units isolation voltage 60 seconds 500 --- --- vdc isolation resistance 500vdc 1000 --- --- mω isolation capacitance 100khz, 1v --- 100 150 pf switching frequency 40 80 --- khz mtbf mil-hdbk-217f @25°c ground benign 0.8 --- --- mhrs
environmental characteristics parameter conditions min. max. units operating temperature ambient -25 +71 °c operating temperature case -25 +90 °c storage temperature -40 +125 °c humidity --- 95 % cooling free-air convection   output characteristics parameter conditions min. typ. max. units line regulation vin = min. to max. --- ±0.2 ±0.5 % load regulation io = 10% to 100% --- ±0.2 ±0.5 % ripple & noise 20mhz bw --- 40 50 mv p-p short circuit continuous   maximum capacitive load models by output voltage(each output on duals) singles duals units 470 220 uf
derating curve (5v outputs) derating curve (other outputs)   notes : 1. specifications typical at ta=+25°c, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. transient recovery time is measured to within 1% error band for a load step change of 50% to 100%. 3. all dc/dc converters should be externally fused at the front end for protection. 4. other input and output voltage may be available, please contact factory. 5. all specifications subject to change without notice.