se-lection guide model number input voltage output voltage output current efficiency load regulation reflected ripple current vdc vdc ma % typ. ma typ. ma typ. s2e01 5 ( 4.5 – 5.5 ) 5 300 75 10 30 s2e02 12 150 75 8 s2e03 15 100 75 6 s2e04 ±5 ±150 75 12 s2e05 ±12 ±63 75 8 s2e06 ±15 ±50 75 6 s2e07 12( 10.8 – 13.2 ) 5 300 75 10 25 s2e08 12 150 75 8 s2e09 15 100 75 6 s2e10 ±5 ±150 75 12 s2e11 ±12 ±63 75 8 s2e12 ±15 ±50 75 6 s2e13 15( 13.5 – 16.5 ) 5 300 75 10 20 s2e14 12 150 75 8 s2e15 15 100 75 6 s2e16 ±5 ±150 75 12 s2e17 ±12 ±63 75 8 s2e18 ±15 ±50 75 6

minmax"s s2e00 model 1.5w dc/dc"s are specially designed to provide 30ma output ripple, continuous short circuit in a low-profile 24-pin dip package. the series consists of 18 models with input voltages of 5v, 12v and 15vdc which offers regulated output voltages of 5v, 12v, 15v, ±5v, ±12v and ±15vdc. the -40°c to +85°c operating temperature range makes it ideal for data communication equipments, mobile battery driven equipments, distributed power systems, telecommunication equipments, mixed analog/digital subsystems, automatic test instrumentation and industrial robot systems.   mechanical dimensions pin connections   pin singles duals 1 +vin +vin 2 +vin +vin 11 +vout +vout 12 +vout +vout 13 -vout common 14 -vout common 15 no pin -vout 23 -vin -vin 24 -vin -vin case size – 31.8x20.3x10.2mm (1.25x0.80x0.40inch) case material – non-conductive black plastic weight – 12.0g (0.42oz) tolerance millimeters inches   x.x±0.25 x.xx±0.01   x.xx±0.13 x.xxx±0.005 pin ±0.05 ±0.002

absolute maximum ratings parameter min. max. units input surge voltage (1000ms) 5vdc input models -0.7 7 vdc 12vdc input models -0.7 17 vdc 15vdc input models -0.7 21 vdc lead temperature(1.5mm from case for 10sec.) --- 260 °c internal power dissipation --- 1000 mw exceeding the unit absolute maximum ratings could cause damage. these are not continuous operating ratings.   general characteristics parameter conditions min. typ. max. units isolation voltage 60 seconds 8000 --- --- vdc leakage current 240vac, 60hz --- --- 2 ua isolation resistance 500vdc 10 --- --- gω isolation capacitance 100khz, 1v --- 10 15 pf switching frequency 50 --- 100 khz mtbf mil-hdbk-217f @25°c ground benign 2 --- --- mhrs

environmental characteristics parameter conditions min. max. units operating temperature ambient -40 +85 °c operating temperature case -40 +95 °c storage temperature -55 +125 °c humidity --- 95 % cooling free-air convection   output characteristics parameter conditions min. typ. max. units line regulation for vin change of 1% --- ±1.2 ±1.5 % load regulation io = 20% to 100% see se-lection guide % ripple & noise 20mhz bw --- 30 40 mv p-p short circuit continuous   maximum capacitive load models by output voltage(each output on duals) singles duals units 470 220 uf

derating curve     notes : 1. specifications typical at ta=+25°c, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. 3. all dc/dc converters should be externally fused at the front end for protection. 4. other input and output voltage may be available, please contact factory. 5. all specifications subject to change without notice.