se-lection guide model number input voltage output voltage output current efficiency load regulation vdc vdc ma % typ. % max. mau401 5( 4.5 – 5.5 ) 5 200 66 10 mau402 12 80 66 8 mau403 15 65 66 8 mau404 ±5 ±100 66 10 mau405 ±12 ±40 72 8 mau406 ±15 ±35 73 8 mau411 12( 10.8 – 13.2 ) 5 200 66 10 mau412 12 80 66 8 mau413 15 65 66 8 mau414 ±5 ±100 66 10 mau415 ±12 ±40 74 8 mau416 ±15 ±35 75 8

minmax"s mau400 1w dc/dc"s are specially designed to provideultra-high levels of isolation 6000vdc in a miniature sip package. the series consists of 12 models with input voltages of 5v and 12vdc which offers standard output voltages of 5v, 12v, 15vdc in both single and dual output configurations. the mau400 series is an excellent se-lection for a variety of applications including distributed power systems, mixed analog/digital subsystems, portable test equipments, local power networks and battery backed systems.   mechanical dimensions pin connections   pin singles duals 1 +vin +vin 2 -vin -vin 5 -vout -vout 6 no pin common 7 +vout +vout   case size – 22.0x7.5x12.5mm (0.87x0.30x0.49inch) case material – non-conductive black plastic weight – 3.9g (0.14oz)           tolerance   millimeters   inches     x.x±0.25   x.xx±0.01     x.xx±0.13   x.xxx±0.005 pin   ±0.05   ±0.002

absolute maximum ratings parameter min. max. units input surge voltage (1000ms) 5vdc input models -0.7 9 vdc 12vdc input models -0.7 18 vdc lead temperature(1.5mm from case for 10sec.) --- 260 °c internal power dissipation --- 650 mw exceeding the unit absolute maximum ratings could cause damage. these are not continuous operating ratings.   general characteristics parameter conditions min. typ. max. units isolation voltage 60 seconds 6000 --- --- vdc isolation resistance 500vdc 10 --- --- gω isolation capacitance 100khz, 1v --- 15 20 pf switching frequency   50 80 100 khz mtbf mil-hdbk-217f @25°c ground benign 2 --- --- mhrs

environmental characteristics parameter conditions min. max. units operating temperature ambient -25 +70 °c operating temperature case -25 +90 °c storage temperature -40 +125 °c humidity --- 95 % cooling free-air convection   output characteristics parameter conditions min. typ. max. units line regulation for vinchange of 1% --- ±1.2 ±1.5 % load regulation io = 20% to 100% see se-lection guide % ripple & noise 20mhz bw --- 100 150 mv p-p short circuit 0.5 second max.     maximum capacitive load models by output voltage(each output on duals) singles duals units 680 220 uf

derating curve   notes : 1. specifications typical at ta=+25°c, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. these power converters require a minimum output load to maintain specified regulation. 3. operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. 4. all dc/dc converters should be externally fused at the front end for protection. 5. other input and output voltage may be available, please contact factory 6. all specifications subject to change without notice.