se-lection guide model number input voltage output voltage output current efficiency reflected ripple current over voltage protection vdc vdc ma % typ. ma typ. vdc mpw1021 12 ( 9 – 18 ) 3.3 5500 81 100 3.9 mpw1022 5 5000 84 6.8 mpw1023 12 2500 88 15 mpw1024 15 2000 88 18 mpw1026 ±12 ±1250 88 ±15 mpw1027 ±15 ±1000 88 ±18 mpw1031 24 ( 18 – 36 ) 3.3 5500 82 50 3.9 mpw1032 5 5000 85 6.8 mpw1033 12 2500 89 15 mpw1034 15 2000 89 18 mpw1036 ±12 ±1250 89 ±15 mpw1037 ±15 ±1000 89 ±18 mpw1041 48 ( 36 – 75 ) 3.3 5500 82 25 3.9 mpw1042 5 5000 85 6.8 mpw1043 12 2500 89 15 mpw1044 15 2000 89 18 mpw1046 ±12 ±1250 89 ±15 mpw1047 ±15 ±1000 89 ±18

minmax"s mpw1000-series power modules are low-profile dc-dc converters that operate over input voltage ranges of 9-18vdc, 18-36 vdc and 36-75vdc which provide precisely regulated output voltages of 3.3v, 5v, 12v, 15v, ±12v and ±15vdc, specially addressing data communication equipments, mobile battery driven equipments, distributed power systems, telecommunication equipments, mixed analog/digital subsystems, process/machine control equipments, computer peripheral systems and industrial robot systems. packing up to 30w of power into a 2x1.6x0.37inch package, with efficiencies as high as 89%, the mpw1000 includes continuous short circuit protection, overvoltage protection, over temperature protection, output trim function, remote on/off, six-sided shielded case and en55022 class a conducted noise compliance minimize design-in time, cost and eliminate the need for external filtering.   mechanical dimensions pin connections   pin singles duals 1 +vin +vin 2 -vin -vin 4 remote on/off 5 no pin +vout 6 +vout common 7 -vout -vout 8 trim   case size – 50.8x40.6x9.3mm (2.00x1.60x0.37inch) case material – metal with non-conductive baseplate weight – 48.0g (1.69oz)   tolerance millimeters inches   x.x±0.25 x.xx±0.01   x.xx±0.13 x.xxx±0.005 pin ±0.05 ±0.002

absolute maximum ratings parameter min. max. units input surge voltage (1000ms) 12vdc input models -0.7 25 vdc 24vdc input models -0.7 50 vdc 48vdc input models -0.7 100 vdc lead temperature (1.5mm from case for 10sec.) --- 260 °c internal power dissipation --- 5500 mw exceeding the unit absolute maximum ratings could cause damage.these are not continuous operating ratings.   general characteristics parameter conditions min. typ. max. units isolation voltage 60 seconds 1500 --- --- vdc isolation resistance 500vdc 1000 --- --- mω isolation capacitance 100khz, 1v --- 1200 1500 pf switching frequency 290 330 360 khz over temperature protection case temperature, automatic recovery 107 112 117 °c mtbf mil-hdbk-217f @25°c ground benign 1 --- --- mhrs

environmental characteristics parameter conditions min. max. units operating temperature ambient -40 +50 °c operating temperature case -40 +105 °c storage temperature -50 +125 °c humidity --- 95 % cooling free-air convection conducted emi en55022 class a rfi six-sided shielded, metal case   output characteristics parameter conditions min. typ. max. units line regulation vin = min. to max. --- ±0.1 ±0.3 % load regulation io = 10% to 100% --- ±0.1 ±0.5 % ripple & noise 20mhz bw --- 55 80 mv p-p short circuit continuous   maximum capacitive load models by output voltage (each output on duals) 3.3v & 5v 12v & 15v ±12v & ±15v units 10000 1000 330 uf     remote on/off control parameter min. max. units supply on 2.5 to 100vdc or open circuit supply off -1 1 vdc control common referenced to negative input output voltage trim parameter conditions min. typ. max. units trim up/down range % of nominal output voltage ±9.0 ±10.0 ±11.0 %

derating curve     notes : 1. specifications typical at ta=+25°c, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. transient recovery time is measured to within 1% error band for a load step change of 75% to 100% 3. these power converters require a minimum output load to maintain specified regulation. 4. operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. 5. all dc/dc converters should be externally fused at the front end for protection. 6. other input and output voltage may be available, please contact factory. 7. all specifications subject to change without notice.