se-lection guide model number nput voltage output voltage outputcurrent efficiency reflected ripple current over voltage protection vdc vdc ma % typ. ma typ. vdc mkw5030 24 ( 18 – 36 ) 2.5 6000 84 100 3 mkw5031 3.3 6000 86 3.9 mkw5032 5 5000 88 6.8 mkw5033 12 2500 88 15 mkw5034 15 2000 88 18 mkw5039 5.1 5000 88 6.8 mkw5040 48 ( 36 – 75 ) 2.5 6000 84 50 3 mkw5041 3.3 6000 86 3.9 mkw5042 5 5000 88 6.8 mkw5043 12 2500 88 15 mkw5044 15 2000 88 18 mkw5049 5.1 5000 88 6.8

minmax"s mkw5000-series power modules are low-profile dc-dc converters that operate over input voltage ranges of 18-36vdc and 36-75vdc which provide precisely regulatedoutput voltages of 2.5v, 3.3v, 5v, 5.1v, 12v and 15vdc, specially addressing data communication equipments, mobile battery driven equipments, distributed power systems, telecommunication equipments, mixed analog/digital subsystems, process/machine control equipments, computer peripheral systems and industrial robot systems. packing up to 30w of power into a 2x1x0.4inch package, with efficiencies as high as 88%, the mkw5000 includes continuous short circuit protection, overvoltage protection, output trim function, remote on/off, six-sided shielded case and en55022 class a conducted noise compliance minimize design-in time, cost and eliminate the need for external filtering.   mechanical dimensions pin connections   pin function 1 +vin 2 -vin 3 remote on/off 4 +vout 5 -vout 6 trim   case size – 50.8x25.4x10.2mm (2.00x1.00x0.40inch) case material – aluminum anodizing treatment in black weight – 32.0g (1.13oz)   tolerance millimeters inches   x.x±0.25 x.xx±0.01   x.xx±0.13 x.xxx±0.005 pin ±0.05 ±0.002

absolute maximum ratings parameter min. max. units input surge voltage (1000ms) 24vdc input models -0.7 50 vdc 48vdc input models -0.7 100 vdc lead temperature (1.5mm from case for 10sec.) --- 260 °c internal power dissipation --- 5500 mw exceeding the unit absolute maximum ratings could cause damage.these are not continuous operating ratings.   general characteristics parameter conditions min. typ. max. units isolation voltage 60 seconds 1500 --- --- vdc isolation resistance 500vdc 1000 --- --- mω isolation capacitance 100khz, 1v --- 1200 1500 pf switching frequency 280 350 400 khz mtbf mil-hdbk-217f @25°c ground benign 0.6 --- --- mhrs

environmental characteristics parameter conditions min. max. units operating temperature ambient -40 +50 °c operating temperature case -40 +105 °c storage temperature -50 +125 °c humidity --- 95 % cooling free-air convection conducted emi en55022 class a rfi six-sided shielded, metal case   output characteristics parameter conditions min. typ. max. units line regulation vin = min. to max. --- ±0.5 ±1.0 % load regulation 2.5v/3.3v/5v/5.1v 12v/15v   io=0% to 100% io=10% to 100%   --- ---   ±0.5 ±0.5   ±1.0 ±1.0   %   ripple & noise 20mhz bw --- 75 100 mv p-p short circuit continuous   maximum capacitive load models by output voltage 2.5v, 3.3v, 5v, 5.1v 12v & 15v units 6800 680 uf     remote on/off control parameter min. max. units supply on 2.5 to 100vdc or open circuit supply off -1 1 vdc control common referenced to negative input output voltage trim parameter conditions min. typ. max. units trim up/down range % of nominal output voltage ±9.0 ±10.0 ±11.0 %

derating curve     notes : 1. specifications typical at ta=+25°c, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. transient recovery time is measured to within 1% error band for a load step change of 75% to 100%. 3. these power converters require a minimum output load to maintain specified regulation. 4. operation under no-load conditions will not damage these modules; however, they may not meet all specifications listed. 5. all dc/dc converters should be externally fused at the front end for protection. 6. other input and output voltage may be available, please contact factory. 7. to order the converter with remote on/off function, please add a suffix -rc (e.g. mkw5030-rc). 8. to order the converter with en55022 class a function, please add a suffix a (e.g. mkw5030a). 9. all specifications subject to change without notice.